River table glue

Transparent Deep Pouring Epoxy Resin A And B Material Crysta

Product ID：River table glue
Whatsapp：+8615088155509
Phone: +86 15088155509
Tel: +86 0769－83203199
Email: zhawu@zhuoyishiye.com
Time: 2023-05-23
INQUIRY

Model	698A	698B
Colour	Transparent liquid	Transparent liquid
Specific gravity 25℃	1.09 g/cm³	0.93 g/cm³
Viscosity 25℃	4200-6000cps	20-30cps
Store life 25℃	6 months	6 months

Ratio	A:B = 2:1 (weight ratio)
Usable time	20℃ is 30 minutes
Curing time	20℃ is 12 hours table dry, 24-48 hours hardening

Note:The above performance data are typical data for testing this product at a humidity of 70% and a temperature of 20 ° C. They are for reference only and cannot fully guarantee all the data that can be achieved in a specific environment. Customers are kindly requested to use the measured data as the standard.

Matters needing attention

1. Before mixing glue, please read the label on the package clearly and confirm the proportion of Agent A and Agent B.
2. Only 3cm thick glue can be cast at a time, if more than 3cm, should be cast in layers. A large amount of glue should be operated at low temperature indoors to avoid cracking during outdoor operation.
3. The gluing tool should be clean, dry, and free of dust, water, and oil.
4. Mix A and B components in proportion and stir evenly to avoid non-curing or insufficient hardness caused by non-uniformity.
5. Because the glue begins to react and heat after mixing, the more glue, the greater the heat will be, and the curing time will be shortened, and the shorter the usable time will be. So please mix the appropriate amount of glue according to the glue filling time, so as not to cause waste.
6. A very small number of people contact glue for a long time will produce mild skin allergy, it is recommended to wear protective gloves when using, stick to the skin available acetone, day water or alcohol wipe, and clean with detergent.
7. Before using a large number of products, please try a small number of products to master the use of skills, so as to avoid mistakes.